Price: $11.69
(as of Aug 06, 2024 20:40:47 UTC – Details)
– Color: White
– Material: PVC
– Size: 11×2.5x2cm/ 4.33×0.98×0.78inch
Package Including
6 x fence
You will receive 6 pieces of dog Fence Reinforcement Groove, sufficient quantity to meet your daily fixing dog gate and replacement needs, convenient and practical.
Pet Gate Support Feet is made PVC material, reliable and sturdy, not easy to break or deform, no odor, can serve you for a long time.
This gates reinforcement groove fitting can be easily moved and installed to another location, bring you a lot of conveniences,to reduce the shaking of the installed gate fence and the stable performance.
The simple design will ensure its high performance as excellent indoor fence accessory,You will have good use experience .
Pet Gate Groove is suitable and wonderful for pet indoor fence and etc.
Good Reinforcement
These WHZAZGW PVC brackets did not quite fit my application due to being EXACTLY the size they showed. I ordered these to snap onto a wood piece that is.875″, thinking they may have enough flew to fit. But, no dice.The size at the back of the U is just as shown at 0.8″. The open portio of the U is slightly smaller at about 0.7″. The construction of the brackets is strong and sturdy with just a little ‘give’. These units seem like they would the job of reinforcing indoor gates very well.
Love these!
These are exactly what I needed to hold my dog pen in a much better position to prevent the dogs from moving panels other than I had them arranged.You just pop this on the bottom (or top) of the pen on the joint areas and then they can no longer flex.I am using it on a heavy duty pen, but you can use it on one of the cheap exercise pens as well. If you do use it on that, I recommend zip ties to keep it on.Definitely ordering more of these.
Didn’t work for my purpose
These PVC brackets are probably fine for reinforcing indoor gates. They are sturdy and the opening is slightly smaller than the back edge to help them stay in place. I tried these with the intent of replacing a broken plastic bracket conjoining the edges of a small PVC privacy fence . The squared ends of the PVC fence looked to be the same size, but alas it was off about a 1/4″ and these did not fit. That’s nothing to do with the product itself, just a failed experiment on my part. I guess this is a case of “Measure twice, Order once”. :-). I didn’t want to take stars off for my failure, as otherwise this is a perfectly fine product.
It’s a splint
Good solid material for specific sized pet gate would be fine for repairing a break along the length of a gate member. It’s a formed channel of good quality pvc but unless it’s for the exact width of the channel, resizing of the member to be repaired is necessary. I wouldn’t use this for “doggie gates” unless the channels were drilled through and small bolts or screws used to attach to the broken member. These are not for long splintered breaks. Because of the limited application opportunities this is not a repair material I’d keep on the shelf. Comparing the cost of keeping these and the time and effort to use effectively, I’d just replace the gate.
Keeps it sturdy
Only thing that would make this better is if it was a bigger pack. They helped a lot with stability and were easy to set up
Great for tuff pups
I have a fence for my pup and it helps to keep him out of the certain areas. For the most part it works great. The problem is where the fence connects it has a weak point especially when he gets determined. These connectors are easy to use hold great and really stiffens up the fence. They are very sturdy and well built. The a tight fit but that it holds well.
very thick pvc groove protectors
The protectors are very thick. I cant flex them in my hands, very, very strong. They are white, and slip over the top of the gate area you want to protect or prevent from opening. You can also put this on anything it would fit on to protect against a sharp or pinching edges. The pack includes 6 pieces.